Specifiche di Prodotto

Please read all directions before using. Note B-7000 should be used in a well-ventilated area. Surface should be clean, dry, and free from dirt. For best results, roughen surface before use. Best when used between 70 °F (21 °C) and 85 °F (29 °C). Always test a small area to ensure proper application technique and dry time. Amazing B-7000 directly to each surface to be bonded or repaired. Allow B-7000 to partially cure, 3-6 minutes, before bringing surfaces together. B-7000 hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact. For maximum strength, allow to dry for 48 hours. Cure time increases with lower temperatures and decreases with higher temperatures. Keep threads at the neck of the tube free of B-7000 residue. To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with small amounts of acetone or naphtha; the adhesive will ball up and brush off. Cured material may be removed by cutting or scraping. Store unused Amazing B-7000 at room temperature with cap tightened. NOTE: B-7000 may damage finished surfaces. Avoid such contact until B-7000 is completely dry.